NewsScams & security

Elecbrakes flaw let anyone nearby brake your trailer. Update now

A flaw in Australian-made Elecbrakes controllers let any Bluetooth device in range apply a trailer’s brakes. EB2 and VM1 have a fix; the ELBC 2000 doesn’t.

a place shot at a concrete boat ramp on an Australian estuary on a calm morning: a halftone four-wheel drive is reversing a halftone boat trailer, loaded with a small halftone fishing boat, down the ramp towards the water; a halftone man in his fifties in a cap and boardshorts walks beside the trailer's wheel, one hand raised to guide the driver; halftone mangroves and a jetty sit in the background. the only full-colour element is a large, faithfully drawn bright blue Bluetooth logo, glowing just above the trailer's wheel with three curved signal waves radiating out from it towards the edge of the frame; no other logos and no readable words
Illustration: Digital Advisors

If your trailer has an Elecbrakes brake controller that hasn’t been updated, someone nearby with a phone or laptop can apply its brakes. No pairing, no PIN, no warning.

The flaw affects the EB2 and VM1 controllers made by Elecbrakes on the NSW Central Coast, and the older ELBC 2000. The US Cybersecurity and Infrastructure Security Agency (CISA) published an advisory on 19 November. It says an attacker could take control of a trailer’s brakes, modify the firmware, disable the brake lights or switch off other safety features. CISA lists the products as deployed in Australia and New Zealand.

The EB2 and VM1 have a fix. You have to install it yourself.

Four bytes and the brakes come on

The flaw was found by Patrick Forck and Jeremy McCarthy of Element Digital. Forck noticed his Elecbrakes in-car remote connecting to trailers that weren’t his, often Tasmanian speed camera trailers, while he wasn’t towing anything.

Their write-up shows how far it went. Any device within Bluetooth range, which they put at roughly 10 to 100 metres, could send a four-byte command that applied the brakes. The force could be set from a light touch to maximum. On a closed private road, they confirmed that maximum force braked dramatically harder.

At highway speed, the researchers warn, a trailer braking hard while the car keeps going is a recipe for a jackknife.

There were three flaws in all:

  • No login for the brakes. The brake control accepted commands from any nearby device. CISA rates it 9.6 out of 10, critical.
  • Replayable commands. Commands carried nothing to stop someone recording one and sending it again later.
  • A weak update channel. The researchers found the update path relied on simple checksums and a key shipped inside the app. After the fix, an update can only be started from a phone already paired with the controller.

The researchers found one limit. When the attacker’s Bluetooth connection drops, the brakes release after two to five seconds. Someone who stays in range, near a boat trailer on a ramp or a caravan parked on a hill, can keep them on.

Elecbrakes told the researchers it isn’t aware of any damage or injury caused by the flaws.

The fix is out, but it doesn’t install itself

Element Digital told Elecbrakes on 18 May. Fixed firmware arrived on 6 July: EB2 version 3.0.4.4.3 and VM1 version 1.3.4.2.1. CISA says to open the Elecbrakes app and install the update. Elecbrakes says the app checks for firmware updates when you connect and walks you through it in a few minutes.

The researchers say the fix moves brake control behind a proper encrypted, bonded connection. Pairing a new device for the first time now needs a sequence on the brake pedal, which can’t be faked over Bluetooth.

Not everyone has updated. Elecbrakes co-founder Craig de Leon told iTnews that 60 to 70 per cent of controllers connecting each day are on the latest firmware.

He said Elecbrakes notified 39,843 app users after the fix came out, and owners on older firmware are prompted each time they connect. He also said a website pop-up and advisory page would follow within days. Elecbrakes’ current update page describes the release as improvements to the system’s wireless communication.

Got a remote? Read this first

The update stops older “V2” remotes working. Elecbrakes is swapping them for a new V3 remote for free, with postage both ways covered. A V3 remote has a “V3” sticker on the back and shows “V3” on its screen when it powers up.

Register for the swap before you update, because the update makes a V2 remote incompatible with the controller. Elecbrakes tells remote owners who are travelling to keep using their current setup and update once the new remote arrives. The smartphone app works the whole time, including through Apple CarPlay and Android Auto. So you can update now and use the app until the new remote turns up. If you wait, your controller keeps the flaw until you install the fix.

No fix yet for the ELBC 2000

The ELBC 2000 is the model before the EB2 and VM1. It hasn’t been sold for several years, but some are still on trailers, and Elecbrakes has confirmed it has the same flaw. CISA lists no fix, and the company is working out how to address it.

De Leon told iTnews the risk is reduced while the owner is actively connected through the app or remote. That’s what the product instructions direct. Owners should check the app for an ELBC 2000 update and contact Elecbrakes with any questions.

Connected equipment keeps turning up with gaps like this. Earlier this month, US agencies warned that hackers were targeting internet-connected supermarket refrigeration controllers.

Checklist

  • Check your controller model. Look for EB2, VM1 or ELBC 2000 on the brake controller fitted to your caravan, boat trailer, float or work trailer.
  • Check your remote first. If it has no “V3” sticker and doesn’t show “V3” on power-up, register for the free swap at remoteupgrade.elecbrakes.com. The update stops V2 remotes working.
  • Update the Elecbrakes app. Get the latest version from the App Store or Google Play before you connect.
  • Install the firmware update. Connect to your EB2 or VM1 in the app and follow the prompts. You want EB2 3.0.4.4.3 or VM1 1.3.4.2.1 or later.
  • Use the app until the new remote arrives. The app keeps working after the update, including through Apple CarPlay and Android Auto.
  • Stay connected on an ELBC 2000. Elecbrakes says keeping the app or remote connected while towing reduces the risk. Check the app for an ELBC 2000 update.
  • Update every trailer you manage. If your business runs several trailers, each controller needs its own update.
  • Call Elecbrakes if you’re stuck. Its Australian support line is 1300 516 248, weekdays 8.30am to 4.30pm.